Name: EXPERT Stain & Seal | Semi-Transparent Log & Timber Oil
Brand: EXPERT Stain & Seal
SKU: 606-01
Price: 119.99 USD
Availability: InStock
Rating: 5.0 (2 reviews)

GET REAL GOOD FACTS.

Wood stains today are required to meet the environmental standard of lower volatile organic compounds. Linked to pollution, smog and respiratory problems, VOCs also cause headaches and dizziness. Some may even be carcinogenic. Some of the nation’s top stains in the industry today just meet this environmental standard.

When compared, EXPERT’s 5% solvent, ultra-low VOC rating <250 g/l comes out on top, followed by three of the national leading industry brands at 35% solvent, and <350 g/l 55%, with <550 g/l and 70% solvent with <700 g/l.

GET REAL PEACE-OF-MIND.

Maintain wood’s beauty and integrity with ultra-low VOC oil-based stains from EXPERT. Stain professionals’ and homeowners’ real peace-of-mind comes from knowing that exterior wood projects, and their immediate and global environments are safeguarded against higher off gas levels, keeping them beautifully protected during and after application, for up to three years.

EXPERT Stain & Seal is made by experts for experts, and the homeowners who demand and expect real results.

SEMI-TRANSPARENT

DEEP PENETRATING OIL FORMULA FOR FENCES, DECKS, SIDING, SHAKES & LOG HOMES

PALLET SPECS

	1 Gallon Pail	5 Gallon Pail
Pails per Pallet	120	48
Pail Weight	8 lbs.	40 lbs.
Pallet Dimensions	42” W x 48” D x 54” H	42” W x 48” D x 66” H

Experience the real goods with EXPERT ™ Stain & Seal.

Coverage Rates

Coverage rate for most projects will be:

125-150 square feet per gallon on rough cut lumber projects

175-200 square feet per gallon on smooth cut lumber projects

Application Method

Mix contents well before use, stir contents often during use. Stir thoroughly, as pigment concentrations may settle. DO NOT THIN THIS PRODUCT. If using multiple pails of stain, mx them for consistent color uniformity. Apply using a brush, roller, stain mitt, stain applicator pad, or sprayer. Apply one coat by fully saturating the wood surface with a generous amount of stain. DO NOT ALLOW THE STAIN TO POOL OR PUDDLE ON FLAT SURFACES. Remove or spread out any stain left on the wod surface after 30-60 minutes. EXPERT Stain & Seal self levels on vertical surfaces, while back brushing may be required on horizontal surfaces. Using a dry cloth, remove puddled or excess stain after application from flat, horizontal surfaces. If not removed it may leave a shiny film on the surface, delay drying time, and cause premature failure.

EXPERT Stain & Seal's penetrating oils go deep into the wood, drying slowly for several days after application. Finished color can take up to several weeks for true color. DO NOT walk on stained surfaces for 24 hours, allowing 72 hours for light traffic.

Semi-transparent log and timber oil

Ordered one gallon to try it out. Had already tried two other manufacturers but did not like the color results. This came in a light plastic container, so was somewhat concern of handling and what the product was like. Applied very easy and smooth using a 2 inch brush. The color is amazing if you' like early american in which we do. The oil seemed to absorb very fast into the wood 9.5 percent wet in 60 degrees temperatures. So far very satisfied and would definitely buy again.